INNOKIN EZ.WATT KIT 13-35W 1500MAH
Frequently bought together
The Innokin EZ.WATT vape starter kit is a compact mod style design that offers a great experience to both new and regular users. EZ.WATT is easy to operate and has 3 preset power levels of low, medium and high ranging from 13-35W. Select your desired power level with the press of a button and the bright three color LED clearly indicates the current level.
The T20S Tank with Prism S coil offers a satisfying mouth to lung (MTL) experience and great flavour. Prism S tank has a 2ml capacity, features full airflow control, top fill for easy re-filling and an advanced top-down coil swap system.
How to use the Innokin EZ.watt vape kit?
Innokin EZ.Watt vape kit is a box mod vape kit that is well suited to beginner and more regular vapers. A long battery life is delivered by a 1500 mah internal battery and power output is adjustable from 13-35 watts with 3 pre-set optimised wattage levels. Innokin slipstream tank features include a 2ml capacity, fully adjustable airflow control and top-fill that allows for easy tank refilling. The slipstream tank is compatible with both 0.8 ohm and 1.5 ohm Prism S replacement coils, available on Vape Store.
Innokin EZ Watt starter kit is a box mod design which is usually associated with larger, more powerful vape kits that that are less user friendly when it comes to adjusting vape settings. However, Innokin EZ.Watt is simple to operate with a choice of 3 pre-set power levels to customise your vaping experience. These 3 optimized wattage levels are selected by the press of a button and 3 bright LED’s indicate if Innokin EZ.Watt is set to low, medium or high power. The power modes are 13-14 watts, 16-18 watts and 30-35 watts respectively. The higher the power, the more rapidly the Innokin prism coil will vaporise the E-liquid and produce more vapour and flavour.
Innokin EZ Watt uses 510 threading and the proven slipstream tank that is compatible with the prism s coils. The prism s coil rated at 0.8 ohm comes pre-installed in the slipstream tank and the 1.5 ohm coil is supplied as a spare. The 0.8 ohm coil will give the best vaping experience at the higher power mode.
Your new Innokin EZ.Watt kit will contain everything you need in the box to get going and start vaping, with the exception of E-Liquid. E-Liquid will need to be purchased separately. Vape Store offer a wide range of E-liquids from Australia, USA and around the world. We also offer vape starter kits for beginners to advanced users, vape accessories and some great online deals. Check out our free shipping option.
Vape Store recommend charging your Innokin EZ Watt kit when you first receive it. To get the best battery life, charge your battery for 2-3 hours and don’t leave it to charge for extended periods of time. A box mod kit usually delivers a longer battery life than a pen style vape if correctly charged and maintained as the battery capacity is larger. You slipstream tank will come pre-installed with the 0.8 ohm coil. This is ideal for the medium and high power levels. If you prefer a low power output, we recommend using the 1.5ohm coil. This will be cooler, produce less vapour but will give a longer battery life than the 0.8 ohm prism coils.
Once you have filled your filled your tank with E-Liquid and allowed it to stand for 5 minutes you are ready to vape. EZ Watt kit does have optimized wattage levels, but start on the low power and then increase the power as required by pressing the power button. The LED indicator will show the selected power level on your starter kit.
How to fill the EZ.watt?
Innokin EZ Watt kit features a top-fill mechanism which allows you to refill your slipstream tank from the top while it is connected to your battery. To refill the EZ Watt kit, first unscrew the drip tip. Drip tips are the mouth piece at the top of the tank. Once the drip tip is unscrewed and the tank is open, fill the tank against the side wall of the tank making sure you do not pour E-Liquid directly into the coil as this will flood the coil.
How long to charge Innokin ez watt?
EZ Watt.kit will be fully charged in 2-3 hours when connected to a 1A wall plug. Innokin recommends that you only use the micro usb cable supplied with your EZ Watt kit and do not overcharge the battery. When the battery is fully charged, the battery life indicator LED will be green.
How to change coil on Innokin ez watt?
Innokin EZ Watt kit is shipped with 2 different Innokin prism S coils; a 0.8 ohm coil pre-installed in the slipstream tank and a 1.5 ohm spare coil. To change the coil first unscrew the slipstream tank from the battery and then unscrew the top lid of the tank and remove the E-Liquid. Then unscrew the bottom lid of the tank and pull out the coil and replace it with a new replacement prism s coil, either 0.8 or 1.5 ohm. Ensure the straight edge of the tank lines up with the coil so that you can push the coil all the way into the tank. Finally, screw closed the bottom lid of the tank and make sure it closes fully without leaving a gap. If there is a gap the coil is not inserted all the way in; you need to open the lid and rotate the coil a little so it lines up properly and then close the tank. Remember to fill your tank and allow EZ.Watt to stand for 5 minutes before vaping to allow the new coil cotton to absorb the E-Liquid.
How to clean Innokin ez watt?
Innokin EZ Watt battery and outer parts can be wiped down with a damp clean cloth. To clean the tank, Vape Store recommends taking the tank apart, removing the coil and then washing the parts of the tank in warm soapy water. Rinse and then dry thoroughly. Vape Store recommend that you clean your tank on a weekly basis. To get the best battery life from your EZ Watt kit, we recommend keeping the battery dry, clean and handle it with care.
Why buy the EZ.watt kit from Vape Store?
Innokin EZ.Watt kit is available on Vape Store for $49.95 plus shipping. Spend $99 to get free shipping with an express shipping option also available. Not only do Vape Store offer a wide range of quality vaping products and accessories but we also have some great vape deals as well, with customer support to match. Whether you need advice with something on our site, or you have had your kit a while and need a little help, we are always happy to help.
Mouth to Lung (MTL) Vaping Experience
Battery Capacity: 1500mAH
Operating Wattage: 13W-35W
Preset Power Modes: 13-14W / 16-18W / 30-35W
Tank Capacity: 2ml
Minimum Resistance: 0.2ohm
Top Fill Design with Twist Off Cap
Dual Airflow Holes
Battery Life Indicator
Charging: Micro USB DC 5V/1A
1 x Innokin EZ.WATT Mod Battery
1 x Prism T20S Tank (0.8ohm)
1 x Pre-Installed: 0.8ohm Prism S Coil coil
1 x Prism S Coil (1.5 ohm)
1 x Spare Drip Tip
1 x Spare O-Rings Set
1 x Micro USB Recharge Cable
1 x User Manual